Functions1)

Operations

To insert a blank

Press GROUP and

space.

press the 5-way

 

control key towards

 

> at the same time.

 

 

To delete a letter.

Press GROUP and

 

press the control key

 

towards . at the

 

same time.

 

 

To cancel labeling.

Press x for 2 seconds

 

or more.

 

 

To move the cursor

Press the 5-way
from the letter

control key towards

input area to the

VOL –.

character palette.

 

 

 

To move the cursor

Press x.

from the character

 

palette to the letter

 

input area.

 

 

 

To display “_

Press X.

(space)”, “:”, “/”

 

or “–” at the input

 

position in the

 

letter input area.

 

 

 

To switch between

Press X.

capital letters and

 

small letters.

 

 

 

1)Functions of the buttons or the control may differ depending on when the cursor is in the letter input area or in the character palette.

5 Repeat step 4, and then enter all characters of the label name.6 Press NENT for 2 seconds or more.Re-labeling

You can change the label of the disc, a group or a track by doing the procedure for “Labeling” (page 58).

Assigning tracks or groups as a new group (Group Set)

With this function, you can assign existing tracks or groups to a new group, and also you can assign a track that currently belongs to no group to an existing group.

You can create a maximum of 255 groups on a Hi-MD disc or a standard disc in Hi- MD mode and 99 groups on a standard disc.

Disc

Track number

Group 1

Group 2

1 2 3 4 5 6 7 8 9 101112

Assigning tracks 1 to 3 to a new group

Assigning group 1 and group 2 to a new group

Disc

Group 1

Group 2

1 2 3 4 5 6 7 8 9 101112

Registration of non-consecutive tracks is not possible (for example, track 3 and tracks 7 and 8 cannot be assigned to a new group).

It is not possible to make a new group if the first track or last track of the group has been selected from the middle of an existing group.

Track numbers appear according to their order on the disc, not their order within the group.

59