z

•Settings can also be changed while playback is momentarily paused (X).

•If the recorder is not operated approximately for 5 minutes, the current setting is stored and the display automatically switches to normal playback.

Notes

•When you use the Digital Sound Preset, the sound may break or become distorted depending on the settings or the track. In this case, change the settings of the sound quality.

•Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound.

Checking the remaining time or the playing position

You can check the track name, disc name, etc. during playback. Group-related items appear only when a track with group settings is played.

>, .MENU/

ENTER

1 While the recorder is playing, press MENU.

2 Press > or . repeatedly until “DISP” flashes in the display, and then press ENTER.

3 Press > or . repeatedly until the information you want flashes in the display.

Each time you press ., the display changes as follows:

AB

On B

LapTim

The elapsed time of the current track.

r

1 Rem

The remaining time of the current track.

r

GP Rem

The remaining time after the current location in the group.

r

AllRem

The remaining time after the current location.

4 Press ENTER.

The display changes as follows: The information selected in step 3 appears in A and B.

A— the information selected in step

3.

B — track number, track name, group name, or disc name.

Note

Items may appear differently or may not be selectable, depending on group mode’s on/off status, the recorder’s operating status, or the recorder settings.

z

If you want to check the remaining time or the recording position while recording or in stop mode, see page 27.

33