z

•To temporarily record without recording over the current contents, press END SEARCH before the start of recording. The recording will begin after the last track, even if “R-Posi” is set to “FrHere” (factory setting). The remaining recordable time on the disc will appear in the display when you press END SEARCH.

•The recorder will not overwrite existing material when group mode is on. In group mode, you can only record tracks to create a new group (page 23) or record tracks within an existing group (page 24).

Notes

•The setting will remain even after the power is turned off.

•If you start recording while the recorder is in play-pause mode, the recording will begin from the point at which it is paused even when the “R-Posi” is set to “Fr End”.

Adding track marks automatically (Auto Time Stamp)

Use this feature to add track marks automatically at specified intervals when recording through the analog input connector.

>, .MENU/

ENTER

1 While the recorder is recording or in recording pause, press MENU.

2 Press > or . repeatedly until “TimeMk” flashes in the display, and then press ENTER.

3 Press > or . repeatedly until the desired time interval flashes in the display, and then press ENTER.

Select one of the following intervals:

Display

Time

 

 

OFF

—

 

 

5 min

Approx. 5 min.

 

 

10 min

Approx. 10 min.

 

 

15 min

Approx. 15 min.

 

 

To cancel Auto Time Stamp

Select “OFF”, and then press ENTER in step 3, or stop recording.

25