Press MENU.

Adjusting treble or bass (Digital Sound Preset)

You can adjust the treble and bass to suit your taste. The player can store two sets of treble-bass adjustments, which can then be selected later during playback.

>, .MENU/

ENTER

Selecting the sound quality

Factory settings

Factory settings of the Digital Sound Preset are as follows:

•“SOUND1”: bass +1, treble ±0

•“SOUND2”: bass +3, treble ±0

1

2 Press > or . repeatedly until “S-SEL” flashes in the display, and then press ENTER.

3 Press > or . repeatedly until “SOUND1” or “SOUND2” flashes in the display, and then press ENTER.

To cancel Digital Sound Preset

Select “OFF” in step 3.

Adjusting the sound quality

You can change the preset sound quality. To change the preset sound quality, select “SOUND1” or “SOUND2”, the one you want to change, in advance.

1 While playing and “SOUND1” or “SOUND2” has been selected, press MENU.

2 Press > or . repeatedly until “S-SET” flashes in the display, and then press ENTER.

The display shows the currently selected “BASS” sound setting.

3 Press > or . repeatedly to adjust the sound level.

Shows “SOUND1” or “SOUND2” is selected

The sound can be adjusted in 8 steps (–4, –3, ...±0, ...+2, +3).

4 Press ENTER.

“BASS” is set and the display changes to “TRE” (treble) setting mode.

5 Press > or . repeatedly to adjust the sound level, and then press

ENTER.

“TRE” (treble) is set.

The sound settings are saved and the playback display appears again.

To cancel selecting

Press CANCEL.

32