Notes

•When you erase a track mark between the two consecutive tracks that are registered into different groups while group mode is off, the second track is re-registered into the group containing the first track. In addition, if you combine a track that is registered to a group with a track that is not registered to a group (two consecutive tracks), the second track takes the same registration setting as the first track. However, when group mode is on, you can only combine tracks within the selected group.

•You cannot erase track marks according to the system limitations. For details, see “System limitations” (page 48).

Erasing tracks

GROUP/CANCEL

3 Press > or . repeatedly until

“ ” and “T:Ers” flash in the display, and then press ENTER.

“Erase?” and “ENTER” appear alternately in the display.

4 Press ENTER again.

The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.

To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase

(page 40), then erase the part.

To cancel erasing

Press CANCEL.

>, ., x

MENU/

 

ENTER

To erase a track

Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.

1 While playing the track you want to erase, press MENU.

2 Press > or . repeatedly until “EDIT” flashes in the display, and then press ENTER.

“ ” and “T:Name” flash in the display, and the recorder plays the selected track repeatedly.

41