Symptom | Cause/Solution |
|
|
Volume cannot be | • AVLS is on. |
turned up. | , Set AVLS to “OFF” (page 43). |
|
|
An MD is not played | • Playback mode is changed. |
normally. | , Change to the normal play. |
|
|
An MD is not played | • Disc playing stopped before it came to the last track. |
from the first track. | , Press N for 2 seconds or more to start playing. |
| • Group mode is turned on. |
| , Turn group mode off and play from the first track (press N |
| for 2 seconds or more to start playing). |
|
|
Playback sound | • The recorder is placed where it receives continuous vibration. |
skips. | , Put the recorder on a stable place. |
| • A very short track may cause sound to skip. |
| , Try not to create a track under one second long. |
|
|
Sound has a lot of | • Strong magnetism from a television or such device is interfering |
static. | with operation. |
| , Move the recorder away from the source of strong |
| magnetism. |
|
|
Cannot find the track | • You pressed X after pressing . or >. |
marks. | , Press X before pressing . or >. |
|
|
The disc cannot edit | • The component does not support LP2 stereo or LP4 stereo. |
on other component. | , Edit on other component that support LP2 stereo or LP4 |
| stereo. |
|
|
Momentary noise is | • Due to the special digital audio compression technology used in |
heard. | LP4 stereo mode, momentary noise may occur on very rare |
| occasions with certain sound sources. |
| , Record in normal stereo or LP2 stereo mode. |
|
|
The display window | • The recorder was disconnected from the power source. |
is not normal. | , Let the recorder sit for a while, or disconnect the power |
| source, reconnect it, and then press any of the operation |
| buttons. |
|
|
51