Connect to a digital source using an optical cable
CD player, MD | Portable CD | |||
player, digital | ||||
player, etc. | ||||
amplifier, etc. | ||||
|
| |||
Optical |
|
| Optical | |
|
| mini- | ||
plug | plug | |||
|
| |||
| (not supplied) |
| ||
|
| |||
| (not supplied) |
|
to LINE IN (OPTICAL)
1 Insert a recordable MD and start recording.
For recording operations, see “Recording an MD right away !” (page 6). To record from a portable CD player, set the CD player to pause and then start recording.
LINE IN (OPTICAL) jack is for both digital and analog input
The recorder automatically recognizes the type of line cable and switches to digital or analog input.
Notes
•You can make a digital recording only from an optical type output.
•When recording from a portable CD player, play it on AC power and disable the
•Digital output may be disabled on some portable CD players when the player is not run on AC power.
* Electronic Shock Protection
To start/stop recording in sync with the source player
You can easily make digital recordings of a digital source on an MD.
Before
CD players, | SYNCHRO REC | |
etc. | ||
| ||
|
|
p
1 Slide SYNCHRO REC to ON. “SYNC” appears in the display.
2 Press and slide REC to the right.
The recorder stands by for recording.
3 Play the source sound.
The recorder starts recording when it receives the playing sound.
continued
11