(kill
See Grill Cooking Guide on page 12.
Grills ,(2 piece grates)
*
You can enjoy delicious grilled
food year ‘round, prepared in the | Step 3: Place Grill Spatter Shield | |||
in bottom of Grill Pan. This shield | ||||
convenience of your own kitchen. | ||||
prevents spattering and flash fires | ||||
|
|
| ||
HOW to Assthdc the | [jrill | during grilling. | ||
| ||||
|
|
|
| |
—
Removing (.;rili Element
When removing the parts of the Grill module to clean, be sure all switches are in the OFF position and unit is cool. Remove the 2 Grill Grates and then slide the Heating Unit to the front until unplugged. Remove Grill Spatter Shield, Grill Pan and Grease Collector.
HOW to %4 Grill (3mtrols
The control knob must be pushed in to start; this prevents heating unit from being tur~ed on accident~lly. Push the knob in only when it is in the OFF position. When the knob is in in any other position, it can be turned without pushing it in.
—
Step 1: Position the Grease Collector in the cooktop burner box space provided. Remove grease from Grease Collector after each use.
Step 2: Fit Grill Pan in cooktop over Grease Collector. The hole in center of Grill Pan permits grease to drain into collector. Keep hole open at all times.
Step 4: Make sure all controls are turned to OFF. Hold Heating Unit with terminals facing rear of the Cooktop and level with the surface. Insert terminals into Cooktop receptacle as far as they will go. (Do not force). Heating Unit should rest on ledge of the Grill Pan.
Step 5: Place the 2 Grill Grates on the Grill Pan over the Heating Unit. Grates should be seated properly on Grill Pan or grease will leak between Grill Pan lip and main top and build up in burner box area.
Push in control knob depending on which side of cooktop Grill Module is used. The right front control knob controls the grill when module is on the right side and left front control knob operates grill when Grill Module is on left side of cooktop.
Turn knobs to the heat setting you want.
10
