continued
TRACK MARK
Cancel labeling.
PLAY MODE
Delete a letter and move back all following letters to the left.
DISPLAY
Insert a blank space to type in a new letter.
=/(•+
Change the letter to the one before / next one.
VOL +/–
Move the cursor to the left or right.
P
Switch between capital letters, small letters, and marks / numbers.
Press/ Turn
To
3 Press p.
The disc is ready to be labeled.
4 Turn the control to select a letter and press pto enter.
The selected letter stops flashing and the cursor moves to the next input position.
Press DISPLAY for 2 seconds or more.
” : Name” flashes in the display.
2
p
Labeling a disc during stop
1 Insert a disc.
To label a disc that is already in the recorder, press pto stop.
VOL +/–
P
Control
TRACK
MARK
DISPLAY
PLAY MODE
On the remote control
2 To label a track, press EDIT/ENTER again.
To label a disc, press =or + repeatedly until ” 
: Name” flashes in the display, then press
EDIT/ENTER.
3 Follow steps 4 to 6 of ”Labeling a disc during stop” above.
To cancel labeling, press por T MARK.
Note
If, while labeling a track or disc during recording, the track or disc comes to the end, or the next track begins, the labeling that is input up to that point is registered automatically.
25