3 Press p.
The track is ready to be labeled.
4 Follow steps 4 to 6 of ”Labeling a disc during stop” above.
Labeling a track or a disc during recording
1 Press DISPLAY for 2 seconds or more during recording.
” : Name” flashes in the display.
2 To label a track, press p.
To label a disc, turn the control to =or (•+until ” : Name” flashes in the display, then press p.
3 Follow steps 4 to 6 of ”Labeling a disc during stop” above.
To cancel labeling, press TRACK MARK.
Note
When the recording is stopped while labeling a track or a disc during recording, or when the playback moves on to the next track while labeling a track, the input at that point is entered automatically.
Insert a disc and play the track you want to label.
Press DISPLAY for 2 seconds or more.
” : Name” flashes in the display.
1
2
5 Repeat step 4 and enter all characters of the label name.
6 Keep pressing the pfor 2 seconds or more.
The track or disc is labeled.
Labeling a track during playback
Available characters
•Capital and small letters of the English alphabet
•Numbers 0 to 9
•! " # $ % & ( ) * . ; < = > ? @ _ ` + – ' , / : _ (space)
To relabel recordings
Follow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then press EDIT/ENTER (keep pressing pfor 2 seconds or more on the remote control).
Notes
•You cannot relabel premastered MDs or label MDs that have not been recorded.
•The recorder is able to display, but cannot label using, Japanese “Katakana” characters.
26