zEditing recorded tracks
You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
•Do not move or jog the recorder while “Toc Edit”* is flashing in the display.
•You cannot edit tracks on an MD that is
*TOC = Table of Contents
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.
EDIT/ENTER
=+
T MARK
1 Press EDIT/ENTER while playing the track you want to erase.
”
: Name” flashes in the display, and the recorder plays the selected track repeatedly.
2 Press =or +repeatedly until ” 
: Erase” flashes in the display.
3 Press EDIT/ENTER again. ”Erase OK?” and ”Push ENTER” appear alternately in the display. To cancel erasing, press por
T MARK.
To erase a part of a track
Add track marks at the beginning and the end of the part you want to erase, then erase the part.
To erase the whole disc
You can quickly erase all the tracks and data of the MD at the same time.
Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc you want to erase.
EDIT/ENTER
=+
T MARK
1 Press EDIT/ENTER on the recorder.
2 Press =or +repeatedly until
” 
: Erase” flashes in the display.
3 Press EDIT/ENTER again.
”All Erase?” and ”Push ENTER” appear alternately in the display. To cancel erasing, press por
T MARK.
4 Press EDIT/ENTER again.
”Toc Edit” flashes in the display, and all the tracks will be erased.
When erasing is complete, ”BLANK DISC” appears in the display.
21