2 Press <SELECT,repeatedly until “SYNC REC” flashes in the display, and then press ENTER.
SYNC RECSYNC indicator3
4
5
“SYNC” does not appear if optical cable is not connected to the recorder.
Press <SELECT,repeatedly until “SYNC ON” flashes in the display, and then press ENTER.
Press and slide REC to the right.
The recorder stands by for recording.
Play the source sound.
The recorder starts recording when it receives the playing sound.
To stop recording, press x.
z
•You cannot pause manually during
•When there is no sound from the player for more than 3 seconds during
•For longer recording, follow step 1 of
(page 21) to select the recording mode, and then do the procedure of synchro- recording.
Notes
•Do not change SYNC REC setting while recording. Recording may not be done properly.
•Even when there is no recorded sound on the sound source, there may be cases when recording does not pause automatically during
•If a silent portion is encountered for 2 seconds or more during synchro- recording from a sound source other than a CD or an MD, a new track mark is automatically added at the point where the silent portion ends.