3 Press ENTER (ENTER).
The track is ready to be labeled.
4 Follow steps 3 to 5 of “Labeling a disc during stop”.
Labeling a track or a disc during recording1
2 Press <SELECT,(flip the lever towards >or .) repeatedly until “EDIT” flashes in the display, and then press ENTER (ENTER).
“: Name” flashes in the display.
3
4
To label a track, press ENTER (ENTER).
To label a disc, press <SELECT,(flip the lever towards >
or .) repeatedly until “: Name” flashes in the display, then press ENTER (ENTER).
The track or disc is ready to be labeled.
Follow steps 3 to 5 of “Labeling a disc during stop”.
Press T MARK (T MARK).
Notes
•When the recording is stopped while labeling a track or a disc during recording, or when the recording moves on to the next track while labeling a track, the input at that point is entered automatically.
•“LP:” is automatically added at the beginning of track names for tracks recorded in LP2 or LP4 mode.
Relabeling recordingsFollow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then press ENTER (ENTER) for 2 seconds or more.