•The MD player is recording information (track start and end position) from the memory to the disc.
—Wait until this process is completed. Do not expose the player to physical shock, nor disrupt power supply.
BUSY•You tried to operate the recorder while it was accessing the recorded data.
—Wait until the message goes out (in rare cases, it may take 2 - 3 minutes).
NAME FULL•You tried to enter more than 200 letters to label a single track or disc.
•You tried to enter a total of more than 1700 letters for track or disc names.
— Enter the characters within the limit.
Hi DC in•Voltage of the power supply is too high (The supplied AC power adaptor is not used).
—Use the supplied AC power adaptor.
HOLD
•The recorder is locked.
—Move HOLD against the arrow to unlock the recorder (pages 10, 37).
LOW BATT•Battery is weak.
—Charge the rechargeable battery or replace the dry battery (page 9).
MEM OVER•You tried to record with the recorder placed where it receives continuous vibration.
—Put the recorder on a stable place, and start recording again.
NO COPY•You tried to make a copy from a disc that is protected by the Serial Copy Management System. You cannot make copies from a digitally connected source which was itself recorded using digital connection.
—Use analog connection instead (page 20).