Sony MZ-R90/R91 MARK, 37-GB, DISPLAY, control, 2 seconds or more, On the remote control, (page 34) until “ : Name” or, Storing phrases while labeling

3 Flip the jog lever until the phrase you want to erase appears, and then press the lever.

“Erase!” appears and the phrase is erased. If no phrase is stored in the phrase bank, “EMPTY” appears in the display.

To cancel the operation, press xor T

MARK.

On the remote control

DISPLAY

X

control

x

Storing phrases while labeling

1 Do the procedure “On the remote control” in “Labeling recordings” (page 34) to enter a phrase.

2 After entering the phrase, press Xfor

2 seconds or more.

“Entry!” appears in the display and the cursor flashes after the phrase you just stored. You can then continue with labeling operation.

z

You can store phrases from a previously labeled track or disc.

Do the procedure “Relabeling recordings” (page 35) and display the track or disc name that contains the phrase that you want to store. Press VOL +/– repeatedly to move the cursor to the right of the phrase. Then press Xfor 2 seconds or more to store the phrase.

Storing phrases using the EDIT menu

1 Press DISPLAY for 2 seconds or more.

2 Press the control towards .or towards N • >repeatedly until “Name Bank” flashes in the display, and then press x.

3 Enter the phrase you want to store, then press xfor 2 seconds or more.

“Entry” appears in the display and the phrase is stored.

Retrieving phrases stored in the phrase bank

Searching for a phrase by displaying the stored phrase one by one1 Do the procedure “On the remote control” in “Labeling recordings”(page 34) until “ : Name” or“ : Name appears in the display. Then press x.

2 Press Xrepeatedly until the first phrase stored in the phrase bank appears in the display.

3 Press the control towards .or towards N • >repeatedly.

Pressing the control towards .or towards N • >causes the phrases stored in the phrase bank to appear one by one. If you press Xat this time, the first phrase stored in the phrase bank retrieved.

4 Press xwhile the phrase you want is shown in the display.

The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

37-GB