Erasing a track mark

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows.

Erase a track mark

1

2

3

4

 

1 2 3

Track numbers decrease

X

.T MARK

1While playing the track with the track mark you want to erase, press Xto pause.

2Find the track mark by pressing . slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for 2 seconds.

3Press T MARK to erase the mark.

“MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

z

When you erase a track mark, the date, time, and name assigned to the mark are also erased.

Moving recorded tracksYou can change the order of the recorded tracks.ExampleMove track C from the third to the second track.Before movingA B C DA C B DAfter moving

On the recorder

Jog lever

xT MARK

1While playing the track you want to move, press the jog lever so that “EDIT” flashes in the display, and then press the lever again.

“ : Name” flashes in the display and the recorder plays the selected track repeatedly.

2Flip the jog lever until “ : Move” flashes in the display, and then press the lever.

For the example above, “MV 003 t 003” appears in the display.

continued

33-GB