BMD playing

Playing an MD right away!
See the illustrations in the Japanese text (page 21).

If you want to use the rechargeable battery, be sure to recharge them before playing (page 74).

1Start playing.

1 Press the jog lever (R)(N). Turn the control towards N> on the remote control.

A short beep sounds in the headphones/earphones.

2Press VOL +/– on the recorder to adjust the volume. Pull and turn the control towards VOL + or towards VOL – on the remote control.

To stop play, press x.

To

Do this (Beeps in the

 

headphones/earphones1))

Find the
Flip the jog lever (R)
beginning of the
towards .. Turn the
current track
control towards . on

 

the remote control.

 

(Three short beeps)

 

 

Find the

Flip the jog lever (R)

beginning of the

towards >. Turn the
next track
control towards N>

 

on the remote control.

 

(Two short beeps)

 

 

Go backwards
Flip and hold the jog
while playing2)
lever (R) towards ..

 

Flip and hold the

 

control towards .

 

on the remote control.
Go forward
Flip and hold the jog
while playing1)
lever (R) towards >.

 

Flip and hold the

 

control towards

 

N> on the remote

 

control.

Pause

Press X. (Continuous

 

short beeps)

 

Press X again to resume

 

play.
Remove the
Press x, then slide

MD

OPEN to open the lid.3)

1)You can turn off the beep sound.

2)To go backwards or forward quickly without listening, press X and flip and hold the jog lever (R) towards .or > (turn and hold the control on the remote control).

3)Once you open the lid, the point to start play will change to the beginning of the first track (except when the disc information has been stored in the Personal Disc Memory).

About the anti-skip function

The anti-skip function provides resistance to vibrations for varying length of time depending on the playback mode of the track.

Mode
Display
Vibration

 

 

resistance time

 

 

 

Stereo
(none)
Approx. 40 sec.

 

 

 

LP2 Stereo
LP2
Approx. 80 sec.

 

 

 

LP4 Stereo
LP4
Approx. 160 sec.

 

 

 

Monaural
MONO

Approx. 80 sec.

 

 

 

If the playback does not start

Make sure the recorder is not locked. If it is locked, slide the HOLD switch in the opposite direction of the arrow.

When using the headphones/ earphones connect them directly to the recorder

The VOL +/– buttons and the Digital Sound Preset function may become inoperative. In this case, do the procedure below.

1 Press the jog lever (L), flip the lever until “AUDIO OUT” flashes in the display, and then press the lever again.

2 Flip the jog lever (L) until “HeadPhone” appears in the display.
3 Press the jog lever (L) again.

Notes

•The sound may skip during playback when the recorder is exposed to continuous vibration, such as while jogging.

•If the power supply is disrupted (i.e. the battery is removed or becomes exhausted or the AC power adaptor is disconnected) when the recorder is operating, the lid will not open until the power is restored.

Instructions Operating

77