Erasing a track markSee the illustrations in the Japanese text (page 45).

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark.

1While playing the track with the track mark you want to erase, press X to pause.

2Find the track mark by flipping the jog lever (R) towards . slightly. “00:00” flashes in the display.

3Press T MARK to erase the mark. “MARK OFF” appears in the display. The track mark is erased and the two tracks are combined. The number of the newly combined track will be that of the first track and the succeeding tracks will be renumbered.

Notes

•You cannnot erase a track mark that has been written between track marks recorded in different recording mode (such as a track mark between a track recorded in LP2 and a track recorded in LP4). If you try to erase such a track mark, “SORRY” appears in the display.

•You cannot erase a track mark that has been written between a track recorded through a digital connection and a track recorded through an analog connection. If you try to erase such a track mark, “SORRY” appears in the display.

Moving recorded tracksSee the illustrations in the Japanese text (page 46).You can change the order of the recorded tracks.

On the recorder

1While playing the track you want to move, press the jog lever (L), flip the lever until “EDIT” flashes in the display, and then press the lever again. “ : Name” flashes in the display and the recorder plays the selected track repeatedly.

2Flip the jog lever (L) until “ : Move” flashes in the display, and then press the lever.

3Flip the jog lever (L) to select the destination track number.To cancel moving, press x.

4Press the jog lever (L) again. The track moves to the selected destination track.

On the remote control

1Press DISPLAY for 2 seconds or more, turn the control towards . or towards N> until “EDIT” flashes in the display, and then press x.

“ : Name” flashes in the display and the recorder plays the selected track repeatedly.

2Turn the control towards . or towards N> until “ : Move” appears in the display, and then press x.

3Turn the control towards . or towards N> to select the destination track number.

4Press x.The selected track moves just before the destination track.

Instructions Operating

87