Labeling recordings

See the illustration in the Japanese text (pages 47 and 48).

You can name tracks during playback, discs during stop, and both during recording. Each name can be as long as 200 letters.

Each disc can hold up to 1700 alphanumeric letters or 800 katakana characters during playback or stop.

Available characters

•Capital and small letters of the English alphabet.

•Numbers 0 to 9

•! " # $ % & ( ) * . ; < = > ? @ _ ` + – ' , / : _(space)

Labeling on the recorderLabeling a disc during stop

1Insert a disc.

2Press the jog lever (L), flip the lever until “EDIT” flashes in the display, and then press the lever again.

“ : Name” flashes in the display.

3Press the jog lever (L) again.

4Flip the jog lever (L) to select a letter and press the lever to enter.

The selected letter stops flashing and the cursor moves to the next input position.

Press X to switch between katakana, the alphabet, symbols/numbers, and phrases (if phrases are stored in the phrase bank).

Press VOL +/– to move the cursor to left or right.

Flip the jog lever (R) towards > when inputting alphabet, symbol or numbers to change the letter to the one before/next one. Flip the jog lever (R) towards .to go back.

Press END SEARCH together with VOL + to insert a blank space to type in a new letter.

Press END SEARCH together with VOL – to delete a letter and move back all following letters to the left.

Press x to cancel labeling.

5Repeat step 4 and enter all characters of the label name.

6Press down the jog lever (L) for 2 seconds or more.

The track or disc is labeled.

Labeling a track during playback

1Insert a disc and play the track you want to label.

2Press the jog lever (L), flip the lever until “EDIT” flashes in the display, and then press the lever again.

“ : Name” flashes in the display.

3Press the jog lever (L) again.

4Follow steps 4 to 6 of “Labeling a disc during stop” above.

Labeling a track or a disc during recording

1While recording, press the jog lever (L), flip the lever until “EDIT” flashes in the display, and then press the lever again.

“ : Name” flashes in the display.

2To label a track, press the jog lever (L) again.

To label a disc, flip the lever (L) until

“ : Name” flashes in the display, and then press the lever.

3Follow steps 4 to 6 of “Labeling a disc during stop” above.

To cancel labeling, press x.Labeling on the remote control

Labeling a disc during stop

1Insert a disc.

To label a disc that is already in the recorder, press x to stop.

2Press DISPLAY for 2 seconds or more, turn the control towards . or towards N> until “EDIT” flashes in the display, and then press x.

“ : Name” flashes in the display.

3Press x.

The disc is ready to be labeled.

88