On the remote control

Storing phrases while labeling

1Do the procedure “Labeling on the remote control” in “Labeling recordings” (page 88) to enter a phrase.

2After entering the phrase, press X for 2 seconds or more.

“Entry!” appears in the display and the cursor flashes after the phrase you just stored. You can then continue with labeling operation.

Storing phrases using the EDIT menu

1Press DISPLAY for 2 seconds or more, turn the control towards . or towards N> until “EDIT” flashes in the display, and then press x.

2Turn the control towards . or towards N> until “Name Bank” flashes in the display, and then press x.

3Enter the phrase you want to store, then press x for 2 seconds or more. “Entry!” appears in the display and the phrase is stored.

Retrieving phrases stored in the phrase bank

Searching for a phrase by displaying the stored phrase one by one

1Do the procedure “Labeling on the remote control” in “Labeling recordings” (page 88) until

“ :Name” or “ :Name” appears in the display. Then press x.

2Press X repeatedly until the first phrase stored in the phrase bank appears in the display.

3Turn the control towards . or towards N> repeatedly. Turning the control towards . or towards N> causes the phrases stored in the phrase bank to appear one by one. If you press X at this time, the first phrase stored in the phrase bank retrieved.

4Press x while the phrase you want is shown in the display.

The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Searching by the first letter of a phrase

1When labeling a track or disc, pull and turn the control towards VOL + or towards – to move the cursor to the letter which the desired phrase begins with.

2Press X to search.

The phrase for that letter appears in the display. If there are two or more phrases that start with that letter, press X to see the next phrase.

3Press x while the phrase you want is shown in the display.

The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Erasing phrases

1Press DISPLAY for 2 seconds or more, turn the control towards . or towards N> until “EDIT” flashes in the display, and then press x.

2Turn the control towards . or towards N> repeatedly until “BankErase” appears in the display, and then press x.

3Turn the control towards . or towards N> repeatedly until the phrase you want to erase appears, and then press x.

“Erase!” appears in the display and the phrase is erased.

If there is no phrase stored in the phrase bank, “EMPTY” appears in the display.

To cancel the operation, press DISPLAY for 2 seconds or more.

Instructions Operating

91