Storing phrases frequently used in labeling (Phrase Bank)

See the illustration in the Japanese text (pages 50 and 51)

Phrases that you often use in track or disc labeling can be stored in the recorder’s memory. Approximately 40 phrases of about 10 characters each (with a total character count of about 600) can be stored in the phrase bank. The actual number will depend on the length of each phrases.

On the recorder

Storing phrases while labeling a track or disc

1Do the procedure “Labeling on the recorder” in “Labeling recordings” (page 88) to enter a phrase.

2After entering the phrase, press X for 2 seconds or more.

“Entry!” appears in the display and the cursor flashes after the phrase you just stored. You can then continue with labeling operation.

Storing phrases using the EDIT menu

1Press the jog lever (L), flip the lever until “EDIT” flashes in the display, and then press the lever again.

2Flip the jog lever (L) until “Name Bank” flashes in the display, and then press the lever.

3Enter the phrase you want to store, and then press the jog lever (L) for 2 seconds or more.

“Entry!” appears in the display and the phrase is stored.

Retrieving phrases stored in the phrase bank

You can retrieve a phrase stored in the phrase bank anytime you want to use it in a track or disc name.

Searching for a phrase by displaying the stored phrase one by one

1Do the procedure “Labeling on the recorder” in “Labeling recordings”

(page 88) until “ :Name” or

90

“ :Name” flashes in the display.

Then press the jog lever (L).

 

2Press X repeatedly until the first phrase stored in the phrase bank appears in the display.

3Flip the jog lever (L) repeatedly. Flipping the jog lever (L) causes the phrases stored in the phrase bank to appear one by one in sequential order. If you press X at this time, the first phrase stored in the phrase bank retrieved.

4Press the jog lever (L) while the phrase you want is shown in the display. The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Searching for a phrase by its first letter

1When labeling a track or disc, use VOL +/– to move the cursor to the letter which the desired phrase begins with.

2Press X to search.

The phrase for that letter appears in the display. If there are two or more phrases that start with that letter, press X to see the next phrase.

3Press the jog lever (L) while the phrase you want is shown in the display. The cursor flashes after the phrase you just retrieved. You can then continue with labeling operation.

Erasing phrases

You can erase phrases from the phrase bank while the recorder is stopped. You can also erase phrases when the recorder is empty.

1Press the jog lever (L), flip the lever until “EDIT” appears, and then press the lever again.

2Flip the jog lever (L) until “BankErase” appears, and then press the lever.

3Flip the jog lever (L) until the phrase you want to erase appears, and then press the lever.

“Erase!” appears and the phrase is erased. If no phrase is stored in the phrase bank, “EMPTY” appears in the display.

To cancel the operation, press x.