Sony MZ-S1 3Record an MD, REC, END, REC, (x/N, Note, Press, Press, Press, Pause, SEARCH, MENU/ENTER, Control key, Remove the MD, current contents1)

3Record an MD.

REC

Control key(x/N/./

>) X

ENDSEARCHMENU/ENTERTo stop recording, press x.

1While the recorder is stopped, press MENU.Menu items appear in the display.

2Press . or > repeatedly until “SYNC-R” flashes in the display, and then press ENTER.

3Press . or > repeatedly until “ON” flashes in the display, and then press ENTER.

4Press N while pressing REC.The recorder pauses and stands by for recording.5Play the source you want to record.The recorder starts recording automatically when it receives the playing sound.

After you press x to stop, the recorder will automatically turn off in about 10 seconds (when using the dry battery) or about 3 minutes (when using the AC power adaptor).

To cancel synchro-recording

Press . or > repeatedly until “OFF” flashes in the display in step 3, and then press ENTER.

Note

If you record on a previously recorded disc, the recorder is factory set to overwrite the entire contents of the disc. If you want the recording to start after the existing contents, do the procedure “Recording without overwriting existing material” (page 29) before doing step 3, (“Record an MD.”, page 19).

To	Press
Record from the end of the	If “R-Posi” (the record-starting position setting) is set to
current contents1)	“FrHere”, press END SEARCH, and then press N
	while pressing REC.1)
	If “R-Posi” is set to “Fr End”, press N while pressing
	REC.
Record over partway through	N, ., or > to find the start point of recording and
the previous recording1)	press x to stop. Then press N while pressing REC.
Pause	X2).
	Press X again to resume recording.
Remove the MD	x, and open the lid.3) (The lid does not open while
	“Edit” is flashing in the display.)

19