Symptom

Cause/Solution

 

 

The recorder does

• The disc is record-protected (“SAVED” appears).

not work or works

, Slide the tab (page 50).

poorly.

• Recording level is too small to record (when recording

 

manually).

 

, Pause the recorder and adjust the recording level.

 

• A Premastered MD is inserted (“PbONLY” appears) when

 

recording.

 

, Insert a recordable MD

 

• You tried to turn group mode on while setting the program.

 

, Turn group mode on before setting the program.

 

 

The recorder

• The record starting-position setting (“R-Posi”) is set to

overwrites existing

“FrHere”.

materials when

, Set “R-Posi” setting to “Fr End”.

record.

 

The recorder does

• The computer does not recognize the recorder.

not work while

, Verify that the recorder is correctly connected.

connected to the

, Install the driver correctly into your computer.

computer.

, Install the SonicStage software into your computer first, and

 

 

then connect the recorder.

 

 

“No SIG” appears in

• There is no digital signal from the portable CD player.

the display when

, When recording digitally from a portable CD player, use the

recording from a

AC power adaptor and disable the anti-skip function (such as

portable CD player.

ESP) on the CD player (page 20).

 

 

There is no recording

• The AC power adaptor was unplugged or a power outage

on the MD after a

occurred during recording.

recording operation.

 

 

 

The lid does not

• The power sources have been disconnected during recording or

open.

editing, or the battery have been exhausted.

 

, Set the power sources again, or replace the exhausted battery

 

with new ones.

 

• The lid is not firmly closed.

 

, Close the lid until it clicks. Then pull the OPEN switch to

 

open the lid.

 

 

No sound comes

• The headphones/earphones plug is not firmly connected.

through the

, Plug in the plug of the headphones/earphones firmly to i.

headphones/

• Volume is too low.

earphones.

, Adjust the volume by pressing VOL +/–.

 

 

• The plug is dirty.

 

, Clean the plug.

 

 

Volume cannot be

• AVLS is on.

turned up.

, Set AVLS to “OFF” (page 46).

 

 

An MD is not played

• Playback mode is changed.

normally.

, Change to the normal play.

 

 

55