2Play an MD.Control key (VOL +/–/ N/x)1Press N.A short beep sounds in the headphones/ earphones.
2Press VOL +/– to adjust the volume.The volume will be shown in the display.To stop play, press x.

A long beep sounds in the headphones/ earphones.

After you press x on the recorder to stop, the recorder will automatically turn off in about 10 seconds (when using the dry battery) or about 3 minutes (when using the AC power adaptor). Playback starts from the point you last stopped playing. To start playback from the beginning of the first track, press and hold N for 2 seconds or more on the recorder.

To

Press

 

 

Find the beginning of the current track or

..

a previous track1)Press . repeatedly until the beginning of

 

the desired track.

 

 

Find the beginning of the next track2)> once.
Go backwards while playingPress and hold ..

 

 

Go forward while playingPress and hold > .

 

 

Pause

X.

 

Press X again to resume play.

 

 

Remove the MD

x, and open the lid.3)

1)If you press . twice continuously while playing the first track of the disc, the recorder goes to the beginning of the last track on the disc.

2)If you press > during the last track of the disc, the recorder goes to the beginning of the first track on the disc.

3)Once you open the lid, the point to start play will change to the beginning of the first track.

If the play does not start

Make sure the recorder is not locked (page 16, 47).

Suppressing the skips of the sound (G-PROTECTION)

The G-PROTECTION function was developed to provide a higher level of shock resistance than that of existing players.

Note

The playback sound may skip if:

•the recorder receives stronger continuous shock.

•a dirty or scratched MiniDisc is played.

z

•The playback mode will switch automatically (stereo, LP2 stereo, LP4 stereo, or monaural).

•To play only the tracks in a certain group, see “Using the group function (Group Mode)” (page 33).

23