Sony MZ-S1 Adding a track mark, Erasing a track mark, T MARK, T MARK, Control key (.), Add a track mark, Erase a track mark, Track numbers decrease

Adding a track mark

You can add track marks so that the part after the new track mark is counted as a new track. The track numbers will increase as follows:

You cannot add a track mark on a track that has been checked-out from your computer.

1			2		3	4
		Add a track mark
1		2		3	4	5
	Track numbers increase

T MARK

Erasing a track mark

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark. The track numbers will change as follows:

You cannot erase a track mark on a track that has been checked-out from your computer.

1 2 3 4

Erase a track mark

123

Track numbers decreaseControl key (.)

X

T MARK

1 While playing or pausing an MD, press T MARK on the recorder at the point you want to mark.

“MK ON” appears in the display, and a track mark is added. The track number will increase by one.

To add track marks while recording (except while synchro-recording)

Press T MARK on the recorder at the point you want to add a track mark. You can use Auto Time Stamp to add track marks automatically at specified intervals (except while digital recording) (page 30).

1 While playing the track with the track mark you want to erase, press X to pause.

2 Find the track mark by pressing . slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MK 003” appears in the display for 2 seconds.

3 Press T MARK to erase the mark.

“MK OFF” appears in the display. The track mark is erased and the two tracks are combined.

43