System limitations

The recording system in your MiniDisc recorder is radically different from those used in cassette and DAT decks and is characterized by the limitations described below. Note, however, that these limitations are due to the inherent nature of the MD recording system itself and not to mechanical causes.

SymptomCause

 

 

“TrFULL” appears even

When 254 tracks have been recorded on the disc,

before the disc has reached

“TrFULL” appears regardless of the total recorded time.

the maximum recording

More than 254 tracks cannot be recorded on the disc. To

time (60, 74, or 80 minutes).

continue recording, erase unnecessary tracks.

 

 

“TrFULL” appears even

Repeated recording and erasing may cause fragmentation

before the disc has reached

and scattering of data. Although those scattered data can

the maximum track number

be read, each fragment is counted as a track. In this case,

or recording time.

the number of tracks may reach 254 and further recording

 

is not possible. To continue recording, erase unnecessary

 

tracks.

 

 

Track marks cannot be

When the data of a track is fragmented, the track mark of a

erased.

fragment under 12 seconds long (recorded in stereo), 24

The remaining recording

seconds long (recorded in monaural or LP2 mode), or 48

time does not increase even

seconds long (recorded in LP4 mode) cannot be erased.

after erasing numerous short

You cannot combine a track recorded in different

tracks.

recording mode, e.g., a track recorded in stereo and a track

 

recorded in monaural; nor can you combine a track

 

recorded with digital connection and a track recorded with

 

analog connection.

 

Tracks of under 12 seconds, 24 seconds, or 48 seconds in

 

length are not counted and so erasing them may not lead to

 

an increase in the recording time.

 

 

The total recorded time and

Normally, recording is done in minimum units of

the remaining time on the

approximately 2 seconds (in stereo), 4 seconds (in

disc may not total the

monaural or LP2 mode), or 8 seconds (in LP4 mode).

maximum recording time

When recording is stopped, the last unit of recording

(60, 74, or 80 minutes).

always uses this unit of 2 seconds, 4 seconds, or 8 seconds

 

even if the actual recording is shorter. Likewise, when

 

recording is restarted after the stop, the recorder will

 

automatically insert a blank space amounting to 2 seconds,

 

4 seconds, or 8 seconds before the next recording. (This is

 

to prevent accidental erasing of a previous track whenever

 

a new recording is started). Therefore, the actual recording

 

time will decrease whenever a recording is stopped by a

 

maximum of 6 seconds, 12 seconds, or 24 seconds.

 

 

The edited tracks may

The fragmentation of data may cause sound dropout while

exhibit sound dropout

searching because the tracks are played in higher speed

during search operations.

than normal playback.

 

 

52