Notes

The setting will remain even after the power is turned off.

If you start recording while the recorder is in play-pause mode, the recording will begin from the point at which it is paused even when the “R-Posi” is set to “Fr End”.

Adding track marks automatically (Auto Time Mark)

Use this feature to add track marks automatically at specified intervals when recording through the analog input connector.

Control key (./>)

MENU/ENTER

1 While the recorder is recording or in recording pause, press MENU.

2 Press . or > repeatedly until “TimeMk” flashes in the display, and then press ENTER.

3 Press . or > repeatedly until the desired time interval flashes in the display, and then press ENTER.

Select one of the following intervals:

Display

Time

 

 

OFF

 

 

5 minApprox. 5 min.

 

 

10 minApprox. 10 min.

 

 

15 minApprox. 15 min.

 

 

To cancel Auto Time MarkSelect “OFF”, and then press ENTER in step 3, or stop recording.Using Auto Time Mark to add track marks while recordingWhen the elapsed recording time exceeds the time interval for Auto Time Mark:

The recorder adds track marks at the point you set the time interval and from that point the recorder adds a track mark whenever the time interval has elapsed.

Example: Eight minutes of recording has been completed when the Auto Time Mark time interval is set to 5 minutes.

A track mark will be added at the 8- minute point (after the start of recording) and after each 5-minute interval thereafter.

When the time interval set for Auto Time Mark exceeds the elapsed recording time:

The recorder adds a track mark when the set Auto Time Mark time interval has elapsed.

Example: Three minutes of recording has been completed when the Auto Time Mark time interval is set to 5 minutes.

A track mark will be added at the 5- minute point (after the start of recording) and after each 5-minute interval thereafter.

z

“T” appears before the track display on the recorder for track marks added by Auto Time Mark.

Notes

Automatic track marking by Auto Time Mark starts when you add a normal track mark to the disc (i.e., by pressing T MARK or X, etc.).

The setting will be lost when the recording is stopped.

30