Sony MZ-S1 Erasing tracks, Press, GROUP, CANCEL, to stop, MENU/ENTER, To erase a track, Control key (./>), To cancel erasing, 4 Press ENTER again, Press CANCEL in step

Play the disc you want to erase to check the contents.

Press x to stop.

z

When you erase a track mark, name assigned to the mark is also erased.

Notes

•When you erase a track mark between the two consecutive tracks that are registered into different groups while group mode is off, the second track is re-registered into the group containing the first track. In addition, if you combine a track that is registered to a group with a track that is not registered to a group (two consecutive tracks), the second track takes the same registration setting as the first track. However, when group mode is on, you can only combine tracks within the selected group.

•You cannot erase track marks according to the system limitations. For details, see “System limitations” (page 52).

Erasing tracks

Note

You can not erase tracks that have been checked out from your computer. You can not erase a group or an entire disc if it contains a checked- out track. In this case, check in the track or tracks to SonicStage.

Control key (./>)

GROUP/

CANCEL

MENU/ENTER

To erase a track

Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.

1 While playing the track you want to erase, press MENU.

2 Press . or > repeatedly until “EDIT” flashes in the display, and then press ENTER again.

“ ” and “T:Name” flash in the display, and the recorder plays the selected track repeatedly.

3 Press . or > repeatedly until

“ ” and “T:Ers” flash in the display, and then press ENTER.

“Erase?” and “ENTER” appear alternately in the display.4 Press ENTER again.

The track is erased and the next track starts to play. All the tracks after the one erased are automatically renumbered.

To erase a part of a trackAdd track marks at the beginning and the end of the part you want to erase(page 43), then erase the part.To cancel erasing

Press CANCEL in step 3.

To erase the whole discYou can quickly erase all the tracks and data of the MD at the same time.

Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the disc before you erase it.

1

2

3 While the recorder is stopped, press MENU.

44