Connecting the speakers and antennas
AUDIO OUT jack (for the Asian model only)
Use to connect the optional audio component (such as a cassette deck) through an audio connecting cord (optional).
Note
There is no audio output from these jacks while the AUDIO IN function is selected.
Speaker cords
Press down on the tab below the terminal and insert the appropriate speaker cord.
Make sure the metal leads (not the part covered with vinyl insulation) are securely inserted into the speaker terminals. Insert the end of the cord marked with a red line into the + terminal and the cord with no marking into the – terminal.
Make sure to match the projections on the SPEAKER terminals and the speaker cords, and insert the cords firmly to the SPEAKER terminals.
Note
Do not connect speakers other than those supplied with this unit.
Power cord
Connect the power cord to a wall outlet after all other connections have been made.
If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models supplied with an adaptor).
DAB lead antenna (for the UK model only)
| With a DAB external antenna (optional), you can |
| obtain a higher DAB broadcast sound quality. We |
| recommend that you use the supplied DAB lead |
| antenna only temporarily until you install a DAB |
or | external antenna. |
| 75 coaxial cable with F male type connector will be |
| needed to install the DAB external antenna (optional). |
Connect white side |
|
18GB