To cancel a transfer
Press .
When you cancel a transfer, it may take a while for the transfer to stop.
If you cancel a transfer after it has started, the track will not be transferred.
To select the destination memory on a USB device for transferring
For some USB devices, you may have to select the destination memory (for example, the internal memory or a memory card) to which the audio data is to be transferred. In this case, select the memory as follows.
For details on which USB devices are compatible, see page 71.
1 Select the USB function and connect the USB device to the 
(USB) port.
2 Enter the Option menu, select “USB Select”, and then select the destination memory.
3 Do the procedure from step 2 of “Transferring audio data to a USB device” (page 26).
Transferring programmed tracks
When the play mode is set to “PGM” (program) with the HDD function active, you can transfer a program to a USB device connected to the 
(USB) port (page 39).
1 | With the unit stopped, program | |
|
| play set, and the HDD function |
|
| active, press TRANSFER. |
|
|
|
2 | Press /to select “All Step”, and | |
|
| then press ENTER. |
Transfer starts.
Tip
The transfer time depends on the item being transferred.
Example:
A
27GB