You can transfer audio data in the HDD Jukebox to a device connected to the (USB) port. For details on which USB devices are compatible, see page 71.
Transferring audio data to a USB device
Notes
If the AC power adaptor is supplied with the connected device, it is recommended that you operate the device on house current. When operating the device on batteries, make sure the remaining battery power is sufficient. We do not guarantee against malfunctions, transfer failures, or destruction of audio data caused by shortages in battery power.
Make sure that you do not disconnect the USB cable during transfer. If you do, the unit or the connected device may malfunction.
//ENTER
TRANSFER | |
1 | Connect a USB device to the (USB) | |
|
| port on the unit. |
|
| Refer also to the operating manual of the |
|
| USB device. |
|
|
|
2 | Select the HDD function. | |
|
| |
3 | Select an item (album or track) that | |
|
| you want to transfer. |
|
| If you want to transfer the entire contents of |
|
| the HDD Jukebox, go to step 4. |
|
|
|
4 | Press TRANSFER. | |
|
| The unit enters standby mode. |
|
|
|
5 | Press /to select the item you | |
|
| want to transfer. |
To transfer all tracks for the selected album:
Select “All Track”.
To transfer the selected track only: Make sure the desired track is selected.
6 Press ENTER.
Transfer starts.
26GB