Sony PCG-F270, PCG-F250, PCG-F280 manual Connecting a Digital Video Camera Recorder

Models: PCG-F270 PCG-F250 PCG-F280

1 102
Download 102 pages 62.52 Kb
Page 65
Image 65

Connecting Peripheral Devices

55

Connecting a Digital Video Camera Recorder

You can connect a digital video camera recorder to the S200 i.LINK™ (IEEE-1394) connector.

To connect a digital video camera recorder

Plug one end of the i.LINK cable (not supplied) into the i.LINK connector on the left side of the computer and the other end into the DV In/Out connector on the digital video camera recorder.

Digital video

to i.LINK

camera recorder

 

to DV In/Out

i.LINK cable (not supplied)

The Sony digital video camera recorder (DCR-PC7) is pictured; you may need to connect your camera differently.

On Sony digital video cameras, connectors labeled “DV In/Out” or “i.LINK” are i.LINK- compatible.

See the manual that came with your digital video camera recorder for more information on installation and use.

Do not connect more than one digital video camera at a time. The software supplied with your computer will not recognize multiple cameras.

The i.LINK connector on the computer does not supply power to external devices. If the external device requires power from the i.LINK connector, you cannot use the device with the computer.

The computer supports transfer rates up to 200 Mbps; however, the actual transfer rate is the lowest transfer rate of the external device.

The i.LINK features available may vary depending on the software applications you use. See the documentation that came with your software for more information.

Page 65
Image 65
Sony PCG-F270, PCG-F250, PCG-F280 Connecting a Digital Video Camera Recorder, To connect a digital video camera recorder