24VAIO 505 SuperSlim Notebook User Guide

Using the Floppy Disk Drive

You can connect the floppy disk drive to the (USB) connector on your computer:

To connect the floppy disk drive

You do not need to shut down the computer before connecting or disconnecting the floppy disk drive.

Plug the USB cable into the (USB) connector on the computer and the other end into the USB connector on the floppy disk drive. The VAIO logo on the disk drive should be facing up.

Floppy disk drive (supplied)

USB connector

USB cable (supplied)

The supplied floppy disk drive should be used only with PCG-N505. You cannot use this floppy disk drive with another computer.

To use another USB device, such as a USB mouse, simultaneously, connect the supplied i.LINK port replicator (PCGA-UPR5) to your computer (page 37), then plug another USB device into the USB connector on the i.LINK port replicator.

To insert a diskette

1

2

Hold the diskette with the label side facing up.Gently push the diskette into the drive until it clicks into place.

Diskette

Floppy disk drive