Using PC Cards

27

 

2Remove the PC card slot protector.

3Insert the PC card into the PC card slot, front label facing up. Gently push the card into the slot until the card is fixed into the connector. The release button comes out. Pull the release button, then push it down towards the slot.

Insert with the arrow facing forward.

PC card

✍Do not force a card into the slot, as this may damage the connector pins.

If you have difficulty inserting a card, check that you are inserting the card with the correct orientation.

While the card is inserted, your computer may not enter the System Hibernation power management mode. It may enter the System Suspend mode.

It is recommended that you remove the card when your computer enters the System Hibernation mode by pressing the Fn + F12 keys or by using the PowerPanel utility, and when it is set to enter the System Hibernation mode automatically while using a battery as the source of power.

See the manual that came with your PC card for more information on its use.