
26 |
VAIO Z505 SuperSlim Pro Notebook User Guide
To remove a Memory Stick card
Make sure the access light is off. Push the card in toward the computer. When the card comes out, pull it out. The Memory Stick window closes automatically when you remove the card.
✍When the card's erasure prevention switch is set to LOCK, data cannot be recorded or erased.
Before using cards, you should back up important data.
Wait a minimum of 10 seconds after the card finishes reading or writing data before removing it. If the card is removed prematurely, a blue screen with an error message appears, prompting you to continue or exit.
To avoid damaging data:
❏Do not remove a card or turn off the power while the access light is on.
❏Do not use cards in locations that are subject to static electricity or electrical noise.
Do not touch the card connector with your finger or metallic objects.
Do not attach labels other than the supplied label to a card.
Do not bend, drop, or apply strong shock to cards.
Do not disassemble or modify cards.
Do not allow cards to get wet.
Do not use or store cards in a location that is subject to:
❏Extremely high temperatures, such as in a car parked in the sun
❏Direct sunlight
❏High humidity or places with corrosive substances
To prolong the life of cards, use the supplied storage case.
See the instructions that come with your card for more information on use.
To create a slide show that launches automatically when you insert a Memory Stick card
If you want to create a slide show that launches automatically when you insert a card, follow these steps to transfer images from your hard drive to a card.
1
2
3
Insert the card into the card slot.