Troubleshooting
65 |
My computer does not shut down
It is best to shut down your computer using the Shut Down command on the Windows 98 Start menu. Using other methods, including those listed here, may result in loss of unsaved data. If the Shut Down command does not work properly, follow these steps:
❑Restart the computer by pressing Ctrl+Alt+Delete. If this does not work, slide the power switch forward and hold it for four seconds.
❑Unplug the computer from the AC adapter and remove the battery pack from your computer.
My PC card is not working
❑Make sure the PC card is compatible with Windows 98.
❑Use the Sony Notebook Setup utility to disable devices you are not currently using.
When I remove the Memory Stick card, an error message appears.
Insert the card into the slot again and press the Enter key. Wait until the active application finishes, then remove the card. If the message confirms eject of the card, click OK.
Power Management
The operating system may become unstable if a lower power state such as system hibernation is initiated and then changed before the operating system completely enters the lower power state. To restore the computer to its normal operating stability, close all open applications, button forward and hold it there for four seconds or more to completely shut down the computer.
