Using Infrared Communication Devices
33 |
Check the Status tag of the Infrared Monitor in the Windows Control Panel to determine if the infrared device is detected.
If the two devices are too far apart or too close together, data transfer may be interrupted or there may be noise in the transmission.
Do not cover the infrared ports with your hand or any other objects.
Avoid direct sunlight, fluorescent light, or flashing incandescent light near the infrared ports.
See the manual that came with your digital still camera or other infrared communication device for more information on installation and use.
The active area of infrared transmission extends about 39 3/8 inches (1m) with a radius of 15 degrees.
39
3 | / |
| 8 |
inches (1m)
Infrared port
15 degrees
