Recording (continued)

Built-in microphones

Analog level meters

MIC/LINE IN switch Peak level lamps VOLUME dial

REC LEVEL L/R dials

PAUSE button/ indicator

REC button/ indicator

PLAY button STOP button

Recording

To change sampling frequency, quantifying bit number, or the memory and folder for a recording, go to the menu display (page 34). The default sampling frequency and quantifying bit number are “44.10 kHz

16 bit.”

1Position the recorder and the built-in microphones referring to “Preparation before recording” (page 22).

2Set the MIC/LINE IN switch to the “MIC” position.

3Press the  REC button.

The recorder stands by for recording, and the  PAUSE indicator flashes.

4Turn the REC LEVEL L/R dials to adjust the recording levels of the right and left channels, checking the level on the display and the analog level meters.

To adjust the level of the right channel only, pull out the outside (R side) dial slightly and turn it.

Pull out the

outside (R side) dial only.

24