Symptom | Cause/Solution | |
| ||
A character in a folder or • The recorder cannot support or display some special characters and | ||
track name is displayed | symbols that are entered on a computer using Windows Explorer or Mac | |
in unreadable | Desktop. | |
characters. |
| |
| ||
“ACCESSING MEMORY” • If the recorder is required to process an excessive amount of data, the | ||
display does not | message may be displayed for an extended period of time. This is not a | |
disappear. | malfunction of the recorder. Wait until the message disappears. | |
|
| |
You cannot record | • There are other formatted data (for example, images) in the memory. | |
tracks up to the | • “Memory Stick PRO (High Speed)” requires a minimum amount of memory, | |
maximum recording time | ||
even when recording very short tracks. As a result, the actual total | ||
on page 49. | ||
recording time of “Memory Stick PRO (High Speed)” may be shorter than | ||
| ||
| the maximum recording time of the recorder. | |
| • The maximum recording time indicated on page 49 is estimated. It varies | |
| depending on the number of tracks. | |
| • Due to these limitations of the recording system, the sum of the total | |
| recorded time in the counter (elapsed time) and the remaining time | |
| becomes shorter than the maximum recording time of the recorder. | |
| • Even when “MEMORY FULL” is displayed and the recorder stops | |
| recording, the recorder has an extra memory space for editing. This is not a | |
| malfunction of the recorder. | |
| • If recording data volume of one track requires over 2 GB, the consecutive | |
| recording starts as a new track due to the specification of the recorder. | |
The “Memory Stick PRO • Since the “Memory Stick PRO (High Speed)” contains image data or other
(High Speed)” is not | files, the memory required for creating initial folders is insufficient. Use |
recognized. | Windows Explorer or other tools to delete unnecessary files or initialize the |
| “Memory Stick PRO (High Speed)” on the recorder. |
|
|
“.WAV” files cannot be | • A file recorded in a frequency that the recorder does not support cannot be |
played back on the | played back. |
recorder. |
|
The remaining memory • Data may be damaged because the power source was removed during
volume does not reach | recording. Initialize the memory using the recorder. |
100%. |
|
|
|
| Continued on the next page |
Information Additional
43