Operations after Recording (continued)
Dividing a track
You can divide a recorded track. Note that tracks cannot be combined on the recorder after they have been divided.
1During recording, record pausing, playback, or playback pausing, press the DIVIDE button.
The track is divided into two at the point you pressed the button, and “DIVIDING” appears in the display.
Notes
Storing tracks in a computer
Connect the recorder to a computer to save recorded tracks to the hard disk drive of the computer.
1Connect the USB connectors of a computer and the recorder using the supplied USB connecting cable.
“PC CONNECT” appears in the display of the recorder, and it is recognized as a USB Mass Storage Class device on the computer.
You cannot operate the recorder while it is connected to the computer.
•Divided tracks are named as follows:
–During recording/record pausing: The new track will have a new name in the same way as when a new recording starts.
–During playback/playback pausing: “_0” is added to the name of the original track, and “_1” is added to the name of the new track. However, if the original track name is less than 8 bytes, underbars “_” are added to make a
•Tracks cannot be divided if:
–you press the button in the position within less than 0.5 second from the beginning or the end of a track.
–the total number of recorded track reaches the maximum number of recordable tracks (page 48). (“TRACK FULL” appears in the display.)
–the new track name exceeds the maximum number of characters (227 bytes without “.WAV”).
Computer (not supplied)
to a USB connector
to the USB 
connector 
USB connecting cable (supplied)
2The recorder is viewed on Windows Explorer or Mac Desktop as a removable storage device. Drag and drop the track file you want to store to the hard disk drive of the computer.
Note
•Turn off the recorder power when connecting the USB cable. Leaving the power on may cause noise in the audio output from the LINE OUT jack and (headphone) jack.
30