Troubleshooting

If you experience trouble with your recorder, try the following solutions.

1Turn off the recorder completely by removing the batteries and

the AC power adaptor, and then turn it on again. Or use the recorder

to initialize the built-in memory or the “Memory Stick PRO (High Speed).” (Note that initializing will delete all data in the memory.)

2Read through the symptoms and solutions on pages 41 to 43 and messages on pages 44 and 45 to check your recorder.

3If the problem persists, consult with qualified Sony personnel (see the warranty for contact information).

Symptom

Cause/Solution

 

 

The recorder does not

The batteries have been inserted with incorrectly. Reinsert them correctly

operate.

(page 19).

 

The batteries are exhausted. Charge them or replace them with new ones

 

(page 19).

 

The buttons are locked with the HOLD switch. Set the HOLD switch to the

 

“OFF” position (page 17).

 

The POWER switch is set to the “OFF” position. Set it to the “ON” position.

 

 

You cannot start

The MIC/LINE IN switch is in the wrong position. Set it to the “MIC”

recording.

position when using the built-in microphones or an external microphone to

 

input audio for recording. Set it to the “LINE IN” position when external

 

equipment is connected for recording (page 15).

 

The memory is full, or the maximum number of tracks (page 48) have

 

already been recorded. Delete some of the tracks (page 36) or store the

 

tracks to the hard disk of your computer (page 30), and then delete them

 

from the recorder. You can also use a “Memory Stick PRO (High Speed)”

 

with sufficient capacity (page 39).

 

99 tracks have already been recorded in the selected folder. Select another

 

folder (page 37) or delete some of the tracks (page 36).

 

The write-protect switch on the inserted “Memory Stick PRO (High Speed)”

 

is set to “LOCK.” Release the lock.

The ACCESS indicator, The “LED” item in the menu is set to “OFF.” Display the menu and set it to

peak level lamps, or

“ON” (page 36).

REC / PLAY / PAUSE indicators do not light/flash.

Continued on the next page

Information Additional

41