Troubleshooting
On Moisture Condensation
If your computer is brought directly from a cold location to a warm one, moisture may condense inside your computer. In this case, allow at least an hour before turning on your computer. If any problem occurs, unplug your computer, and contact your Sony Service Center.
On Upgrading the Computer System
❑The procedures described in the online manual, Upgrading and Maintaining Your VAIO Digital Studio™ Computer, assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.
❑Disconnect the system from its power source and from any telecommunications links, networks, or modems before you open the system or follow any of the procedures described in the online manual, Upgrading and Maintaining Your VAIO Digital Studio™ Computer. Failure to do so may result in personal injury or equipment damage.
❑Electrostatic discharge (ESD) can damage disk drives,
❑When removing a slot cover, be careful not to damage components on the system board or
On Handling a CRT Display
❑Do not place the display near a strong magnetic force.
❑Do not block the ventilation slots on the display.
❑Using the computer in low temperature conditions may produce a residual image on the screen. This is not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
85