Upgrading and Maintaining Components
49
Removing the Power Supply (PCV-RX series models)
Remove the power supply when you insert a memory module (see “Removing a Memory Module” on page 36).
!Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord.
1Remove the screw that secures the power supply to the rear of the chassis.
2
3
Pull the tab (A) that latches the power supply to the chassis.
Slide the power supply up until the power supply clears the chassis.
Removing the power supply (PCV-RX series model)
A
4 Rotate the power supply upside down and rest it on top of the chassis where the hard drive is located.
