71.Adjust with the [VOL+] key (adjusted value up) or
This set LCD display
82.Press the [ENTER] key and set the address & adjusted value display (see page 14).
This set LCD display
0230D7603
03: Adjusted value
72.Press the X key.
(0D76 is blinking)
73.Press the [VOL+] key to change the blinking portion to 0D78.
This set LCD display
023S01
01: Adjusted value
83.Press the X key to write the modified data. (The adjusted value changes to CC)
84.The modified data writing is over, if the adjusted value changes
to DD.
This set LCD display
0230D7800
00: Adjusted value
74.Press the x key.
(00 is blinking)
75.Adjust with the [VOL+] key (adjusted value up) or
01.
This set LCD display
0230D7801
01: Adjusted value
76.Press the X key.
(0D78 is blinking)
77.Press the [VOL+] key once to change the blinking portion to
0D79.
This set LCD display
0230D7900
00: Adjusted value
78.Press the x key.
(00 is blinking)
79.Adjust with the [VOL+] key (adjusted value up) or
E0.
This set LCD display
0230D79E0
E0: Adjusted value
80.Press the X key.
(0D79 is blinking)
81.Press the [T.MARK] key for several seconds (about 3 seconds) to exit the patch data write mode (to return to the manual mode display in the test mode).
This set LCD display
023Patch
0 23SDD
DD: Adjusted value
85. Turn the power off.
29