
MZ-R501/R501PC
Ver 1.1
Battery operation time |
|
|
|
Battery life1) | (Unit: approx.hours) (JEITA2)) | ||
|
|
|
|
LR6 (SG) alkaline dry battery3) | Normal | LP2 | LP4 |
|
|
|
|
Recording4) | 7.5 | 10 | 13.5 |
Playback | 36 | 42 | 48 |
|
|
|
|
1)The battery life may be shorter due to operating conditions, the temperature of the location, and varieties of batteries.
2)Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association).
3)When using a Sony LR6 (SG) “STAMINA” alkaline dry battery (produced in Japan).
4)To prevent interrupted recording due to drained battery, use new battery for recording operations.
Dimensions
Approx. 83.0 ⋅ 27.8 ⋅ 75.8 mm (w/h/d) (3 3/8 ⋅ 1 1/8 ⋅ 3 in.) without projections.
Mass
Approx. 113 g (4.0 oz) the recorder only Supplied accessories
AC power adaptor (except R501: US, Canadian, E model) (1) Headphones/earphones (1)
Optical cable (except R501: US, E model) (1)
Design and specifications are subject to change without notice.
Flexible Circuit Board Repairing
•Keep the temperature of the soldering iron around 270°C during repairing.
•Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering or unsoldering.
Notes on chip component replacement
•Never reuse a disconnected chip component.
•Notice that the minus side of a tantalum capacitor may be damaged by heat.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
2