Locating a Particular
Point in a Track
You can also use the m and M buttons to locate a particular point in a track during playback or playback pause.
Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
m/M 
To locate a | Press and hold |
point |
|
|
|
While | During playback, press m or M |
monitoring the | on the remote repeatedly. |
sound |
|
|
|
Notes
•If the disc reaches the end while you are pressing M on the remote during sound monitoring, the recorder stops.
•Tracks that are only a few seconds long may be too short to scan using the search function. For such tracks, it is better to play the disc at normal speed.
Playing Tracks
Repeatedly (Repeat Play)
You can play tracks repeatedly in any play mode.
Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.
REPEAT
1 Each time you press REPEAT on the remote, the REPEAT indicator in the front panel display lights and toggles as “REPEAT,” “REPEAT 1,” and then lights off.
The deck repeats the tracks as follows:
When the disc The deck repeats is played in
Normal play | All the tracks by “REPEAT”. |
(page 7) | One track repeat by “REPEAT 1” |
|
|
Shuffle play | All the tracks in random order by |
(page 12) | “REPEAT” |
|
|
Program Play | All the same Program by |
(page 12) | “REPEAT” |
2 Press H.
To stop Repeat Play
Press x.
To cancel Repeat Play
Press REPEAT until the indicator disappears.
Note
You cannot use Repeat Play, when Relay Play is ON (page 13).
Operations Basic
11