Hookups
Connecting the recorder to an amplifier
Connect the amplifier to the ANALOG IN/ OUT jacks using the audio connecting cords (supplied), making sure to match the color- coded cords to the appropriate jacks on the components: red (R) to red and white (L) to white. Be sure to make connections firmly to prevent hum and noise.
|
| CD |
| IN | |
| L | |
|
| |
ANALOG |
| R |
|
| |
IN OUT |
| TAPE / MD |
| L | |
|
| |
|
| OUT IN |
| R | L |
|
| |
|
| R |
l: Signal flow
Connecting the recorder to a digital component such as CD player, DAT deck, or MD deck
Connect the component through the DIGITAL OPTICAL IN/OUT connectors with two optical cables (not supplied).
When using the optical cables
Take the caps off the connectors and then insert the plugs parallelly until they click into place.
Be sure not to bend or tic together the optical cables.
Digital component | |||||
DIGITAL |
| ||||
OPTICAL |
|
| DIGITAL |
| |
|
|
|
| ||
IN OUT |
|
| OPTICAL | ||
|
|
|
| ||
|
|
|
| IN OUT | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This Recorder Can Use the
Following Discs
This recorder can use three types of discs as follows:
Discs with the logo above (Audio CD) can be played by both DECK A (the CD player section) and DECK B (the
Discs with the logo above (Audio
19)the disc, you can play it in either DECK A (the CD player section) or DECK B (the
Discs with the logo above (Audio
l: Signal flow
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Note
Do not connect the AC power cord to a switched outlet.
This logo means that a unit is compatible with Audio
6