Sony RCD-W3 Specifications

Specifications

DECK A (the CD player section)

System	Compact disc and digital
	audio system
Laser	Semiconductor laser (λ =
	780 nm)
	Emission duration:
	continuous
Frequency response	20 Hz – 20,000 Hz (±0.5
	dB)
Signal-to-noise ratio	More than 100 dB
Dynamic range	More than 95 dB
DECK B (the CD-R and CD-RW
recording section)
System	Compact disc digital audio
	system
Laser	Semiconductor laser (λ =
	780 nm)
	Emission duration:
	continuous
Playable discs	CD, CD-R, CD-RW
Recordable discs	CD-R, CD-RW (for music
	use)
Frequency response	20 to 20,000 Hz ±0.5 dB
Signal-to-noise ratio	Over 100 dB during
	playback
Dynamic range	More than 95 dB during
	playback
Inputs
ANALOG IN
(Phono jacks)	impedance 47 kilohms
	Rated input 330 mVrms
	Minimum input
	125 mVrms

DIGITAL OPTICAL IN (Square optical connector jack)

Optical wavelength 660 nm

Outputs

ANALOG OUT

(Phono jacks)Rated output 2 Vrms (at 50 kilohms)

Load impedance over 10 kilohms

OPTICAL DIGITAL OUT (Square optical connector jack)

Wavelength 660 nm Output level -18 dBm

PHONES
(Phone jacks)	28 mW, 32 ohms

General

Power requirements
U.S.A. and Canada	120 V AC, 60 Hz
Other countries	110 – 240 V AC, 50/60
	Hz
Power consumption	20 W

Dimensions (approx.) (w/h/d) incl. projecting parts

	and control
	430 × 108 × 368 mm
Mass (approx.)	4.6 kg
Supplied accessories	See page 5.

Design and specifications are subject to change without notice.

Sony Corporation Printed in China