Finalizing a CD-R or CD-

RW disc

Finalizing completes the recording of a disc. It enables you to play the disc on other players. (The player must be CD-RW compatible. ) When a recording is finished, a CD-R or CD- RW disc must be finalized. Once that is done, a CD-R disc may not be changed or added to. CD-RW discs are locked once they are finalized, and must be unfinalized to permit additional recording or erasure.

When using the remote, set SELECT to CDR for operations on DECK B.

FINALIZE

FINALIZE

2 Press H while the “FINALIZE” indicator is flashing.

Finalizing starts. During finalizing, “ TOC WRITE” appears in the display and the remaining time for finalizing appears in the display. When the finalizing process is finished, the total track number and the total playing time appear in the display and the TOC (red) indicator lights off.

Notes

•The TOC (red) indicator appears on the front panel display if the disc you put in DECK B has not been finalized. Check the indicator each time before finalizing.

•Once finalizing process starts, you cannot stop in the middle of the process.

•Do not turn off the recorder or disconnect the recorder from the power source in the middle of the finalizing process.

CDR on Recording

1 Press FINALIZE.

The “FINALIZE” indicator will begin to flash, and the PLAY, PAUSE, and REC indicators light up for about 8 seconds.

Erasing enters standby mode.

19