Remote Control Settings/ Factory Settings (Others)

The “Others” setup allows you to set up other operational settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Others,” and press ENTER.

The “Others” setup appears with the following options. The default settings are underlined.

Dimmer

Adjusts the lighting of the front panel display.

Normal

Bright lighting.

 

 

Save

Low lighting. Turns off the

Power

lighting when the power is

 

off.

 

 

Power save standby

Selects whether this recorder is in power save mode when the power is off (standby).

On

Sets to power save mode.

 

Normally, select this.

 

 

Off

Does not set to power save

 

mode.

 

 

bNotes

•Power Save mode does not function when there is a timer setting with “PDC/VPS” set to “On” in the Timer List, even if “Power save standby” is set to “On.”

•The SMARTLINK features are not available while the power is off when “Power save standby” is set to “On.”

•To reduce the number of times that the fan turns on automatically, set “Power save standby” to “On.”

Command Mode

Changes the Command Mode of the recorder if other DVD equipment is assigned the same Command Mode. For details, see “If you have a Sony DVD player or more than one Sony DVD recorder” on page 16.

Factory Setup

Allows you to select the setup settings by group, and return them to their default settings. Note that all of your previous settings will be lost.

1Select “Factory Setup” in “Others,” and press , or ENTER.

The display for selecting a group of settings appears.

2Select the group of settings you want to return to default from “Basic,” “Video,” “Audio,” “Recording,” “DVD,” “Others,” “Parental Control,” and “All,” and press , or ENTER.

3Select “Start,” and press ENTER. The selected settings return to their default settings.

4Press ENTER when “Finish” appears.

Adjustments and Settings

69